Keeps the return type consistent with the function name. While we're at
it, we can also reduce the amount of boilerplate involved with handling
these by using structured bindings.
Some objects declare their handle type as const, while others declare it
as constexpr. This makes the const ones constexpr for consistency, and
prevent unexpected compilation errors if these happen to be attempted to be
used within a constexpr context.
Uses arithmetic that can be identified more trivially by compilers for
optimizations. e.g. Rather than shifting the halves of the value and
then swapping and combining them, we can swap them in place.
e.g. for the original swap32 code on x86-64, clang 8.0 would generate:
mov ecx, edi
rol cx, 8
shl ecx, 16
shr edi, 16
rol di, 8
movzx eax, di
or eax, ecx
ret
while GCC 8.3 would generate the ideal:
mov eax, edi
bswap eax
ret
now both generate the same optimal output.
MSVC used to generate the following with the old code:
mov eax, ecx
rol cx, 8
shr eax, 16
rol ax, 8
movzx ecx, cx
movzx eax, ax
shl ecx, 16
or eax, ecx
ret 0
Now MSVC also generates a similar, but equally optimal result as clang/GCC:
bswap ecx
mov eax, ecx
ret 0
====
In the swap64 case, for the original code, clang 8.0 would generate:
mov eax, edi
bswap eax
shl rax, 32
shr rdi, 32
bswap edi
or rax, rdi
ret
(almost there, but still missing the mark)
while, again, GCC 8.3 would generate the more ideal:
mov rax, rdi
bswap rax
ret
now clang also generates the optimal sequence for this fallback as well.
This is a case where MSVC unfortunately falls short, despite the new
code, this one still generates a doozy of an output.
mov r8, rcx
mov r9, rcx
mov rax, 71776119061217280
mov rdx, r8
and r9, rax
and edx, 65280
mov rax, rcx
shr rax, 16
or r9, rax
mov rax, rcx
shr r9, 16
mov rcx, 280375465082880
and rax, rcx
mov rcx, 1095216660480
or r9, rax
mov rax, r8
and rax, rcx
shr r9, 16
or r9, rax
mov rcx, r8
mov rax, r8
shr r9, 8
shl rax, 16
and ecx, 16711680
or rdx, rax
mov eax, -16777216
and rax, r8
shl rdx, 16
or rdx, rcx
shl rdx, 16
or rax, rdx
shl rax, 8
or rax, r9
ret 0
which is pretty unfortunate.
Allows the compiler to inform when the result of a swap function is
being ignored (which is 100% a bug in all usage scenarios). We also mark
them noexcept to allow other functions using them to be able to be
marked as noexcept and play nicely with things that potentially inspect
"nothrowability".
Including every OS' own built-in byte swapping functions is kind of
undesirable, since it adds yet another build path to ensure compilation
succeeds on.
Given we only support clang, GCC, and MSVC for the time being, we can
utilize their built-in functions directly instead of going through the
OS's API functions.
This shrinks the overall code down to just
if (msvc)
use msvc's functions
else if (clang or gcc)
use clang/gcc's builtins
else
use the slow path
The template type here is actually a forwarding reference, not an rvalue
reference in this case, so it's more appropriate to use std::forward to
preserve the value category of the type being moved.
These can just be passed regularly, now that we use fmt instead of our
old logging system.
While we're at it, make the parameters to MakeFunctionString
std::string_views.
Reduces the potential amount of rebuilding necessary if any headers
change. In particular, we were including a header from the core library
when we don't even link the core library to the web_service library, so
this also gets rid of an indirect dependency.
Since C++17, the introduction of deduction guides for locking facilities
means that we no longer need to hardcode the mutex type into the locks
themselves, making it easier to switch mutex types, should it ever be
necessary in the future.
This reduces the boilerplate that services have to write out the current thread explicitly. Using current thread instead of client thread is also semantically incorrect, and will be a problem when we implement multicore (at which time there will be multiple current threads)
We really don't need to pull in several headers of boost related
machinery just to perform the erase-remove idiom (particularly with
C++20 around the corner, which adds universal container std::erase and
std::erase_if, which we can just use instead).
With this, we don't need to link in anything boost-related into common.
In these cases the system object is nearby, and in the other, the
long-form of accessing the telemetry instance is already used, so we can
get rid of the use of the global accessor.
Moves local global state into the Impl class itself and initializes it
at the creation of the instance instead of in the function.
This makes it nicer for weakly-ordered architectures, given the
CreateEntry() class won't need to have atomic loads executed for each
individual call to the CreateEntry class.
This makes the class much more flexible and doesn't make performing
copies with classes that contain a bitfield member a pain.
Given BitField instances are only intended to be used within unions, the
fact the full storage value would be copied isn't a big concern (only
sizeof(union_type) would be copied anyways).
While we're at it, provide defaulted move constructors for consistency.
This causes a reference cycle because ServerPort also holds a shared pointer to SessionRequestHandler (inherited by ServiceFrameworkBase). Given that the member port is never used in ServiceFrameworkBase, we can simply remove it. The port object is kept alive by ServiceManager|KernelSystem::named_ports -> ClientPort -> ServerPort
Services can hold kernel objects and do cleanup upon destruction, so we need to keep the kernel alive longer. The new order approximnately resembles the reverse construction order. I will revisit the ordering issue and make it less error-prone after global state cleanup
When making the initial implementation, I forgot to add the series variable to the AmiiboConfig struct.
With this PR it is added and many of the AmiiboConfig fields get their proper values now.
The loading of the Amiibo data that is added here has been hwtested.
This fixes Amiibos in Yoshis Woolly World, Smash (partially) and probably other games too.
wwylele / 白疾風Today at 6:14 PM
I doubt the performance of constructing regex everytime the function is called
Is TrimSourcePath only called by logging? if so, you can move the implementation into logging, and cache the regex object into global
This function is probably too specific to be in common anyway
Previously this check is in GetSurface (if (addr == 0)). This worked fine because GetTextureSurface directly forwarded the address value to GetSurface. However, now with mipmap support, GetTextureSurface would call GetSurface several times with different address offset, resulting some >0 but still invalid address in case the input is 0. We should error out early on invalid address instead of sending it furthor down which would cause invalid memory access
* gdbstub: fix IsMemoryBreak() returning false while connected to client
As a result, the only existing codepath for a memory watchpoint hit to break into GDB (InterpeterMainLoop, GDB_BP_CHECK, ARMul_State::RecordBreak) is finally taken,
which exposes incorrect logic* in both RecordBreak and ServeBreak.
* a blank BreakpointAddress structure is passed, which sets r15 (PC) to NULL
* gdbstub: DynCom: default-initialize two members/vars used in conditionals
* gdbstub: DynCom: don't record memory watchpoint hits via RecordBreak()
For now, instead check for GDBStub::IsMemoryBreak() in InterpreterMainLoop and ServeBreak.
Fixes PC being set to a stale/unhit breakpoint address (often zero) when a memory watchpoint (rwatch, watch, awatch) is handled in ServeBreak() and generates a GDB trap.
Reasons for removing a call to RecordBreak() for memory watchpoints:
* The``breakpoint_data`` we pass is typed Execute or None. It describes the predicted next code breakpoint hit relative to PC;
* GDBStub::IsMemoryBreak() returns true if a recent Read/Write operation hit a watchpoint. It doesn't specify which in return, nor does it trace it anywhere. Thus, the only data we could give RecordBreak() is a placeholder BreakpointAddress at offset NULL and type Access. I found the idea silly, compared to simply relying on GDBStub::IsMemoryBreak().
There is currently no measure in the code that remembers the addresses (and types) of any watchpoints that were hit by an instruction, in order to send them to GDB as "extended stop information."
I'm considering an implementation for this.
* gdbstub: Change an ASSERT to DEBUG_ASSERT
I have never seen the (Reg[15] == last_bkpt.address) assert fail in practice, even after several weeks of (locally) developping various branches around GDB. Only leave it inside Debug builds.
udp_server might not be created due to error (occupied port etc.), in which case its destructor and thread-ending call chain will not be excuted in Server::Stop. However, the ending packet still need to be send no matter udp is on or not, so move it to Server::Stop
MSVC does not seem to like using constexpr values in a lambda that were declared outside of it.
Previously on MSVC build the hotkeys to inc-/decrease the speed limit were not working correctly because in the lambda the SPEED_LIMIT_STEP had garbage values.
After googling around a bit I found: https://github.com/codeplaysoftware/computecpp-sdk/issues/95 which seems to be a similar issue.
Trying the suggested fix to make the variable static constexpr also fixes the bug here.
Makes it consistent with the regular standard containers in terms of
size representation. This also gets rid of dependence on our own
type aliases, removing the need for an include.
The necessity of this parameter is dubious at best, and in 2019 probably
offers completely negligible savings as opposed to just leaving this
enabled. This removes it and simplifies the overall interface.
video_core: shorten GetGLSLVersionString
video_core: make GLES version and extensions consistent
video_core: move some logic to LoadShader
video_core: deduplicate fragment shader precision specifier
The comment already invalidates itself: neither MMIO nor rasterizer cache belongsHLE kernel state. This mutex has a too large scope if MMIO or cache is included, which is prone to dead lock when multiple thread acquires these resource at the same time. If necessary, each MMIO component or rasterizer should have their own lock.
To eliminate System::GetInstance usage. Archive type like SelfNCCH and SaveData changes the actual reference path for different client, so archive backend interface should accept client information from the service interface. Currently we only pass the program ID as the client information.
The UI file is rewritten, to better make use of Qt's layouts (instead of depending on abstract geometry). "Add Cheat", "Save", "Delete" buttons are also added.
The UI logic should be rather easy and usable (IMO), but the code may seem a bit dirty. If anyone has a better idea regarding UI logic design or code implementation, feel free to tell me about it.
Added a few interfaces for adding/deleting/replacing/saving cheats. The cheats list is guarded by a std::shared_mutex, and would only need a exclusive lock when it's being updated.
I marked the `Execute` function as `const` to avoid accidentally changing the internal state of the cheat on execution, so that execution can be considered a "read" operation which only needs a shared lock.
Whether a cheat is enabled or not is now saved by a special comment line `*citra_enabled`.
To break a circular reference formed by process->handle_table->shared_memory->process. Since SharedMemory uses its owner process in the destructor, which is not kept alive by SharedMemory any more, we need to make sure that the lifetime of process is longer than the shared memory. To partially resolve this, Process now explicitly releases shared memory first in its destructor. This is with the assumtion that there is no inter-process reference to shared memory on exit, which is not true when we introduce more multi-process emulation. A TODO is left there for this, as more RE needs to be done on how 3DS handles this situation
This commit it automatically generated by command in zsh:
sed -i -- 's/BitField<\(.*\)_le>/BitField<\1>/g' **/*(D.)
BitField is now aware to endianness and default to little endian. It expects a value representation type without storage specification for its template parameter.
This is compromise for swap type being used in union. A union has deleted default constructor if it has at least one variant member with non-trivial default constructor, and no variant member of T has a default member initializer. In the use case of Bitfield, all variant members will be the swap type on endianness mismatch, which would all have non-trivial default constructor if default value is specified, and non of them can have member initializer
According to documentation, if the argument of std::exp is zero, one is returned.
However we want the return value to be also zero in this case so no audio is played.
The V-Sync option is fundamentally broken in Citra, so let's do the same as yuzu and remove it entirely for SDL2 and at least from the frontend for QT.
(It was also only used by 7.3% of users)
Just two minor fixes:
1. Font color is black in dark theme. It is now only black for pings.
2. If a user is called `abc`, you can ping them by `@abc_`. Now a ping only takes effect when there are spaces around it.
std::make_unique for arrays is equivalent to doing:
std::unique_ptr<T>(new typename std::remove_extent<T>::type[size]())
(note the ending () after the array size specifier). This means that the
default value within memory for the constructed types will be whatever
the default constructor for that type does. Given the built-in
type for std::uint8_t doesn't have a constructor, this is equivalent to
forcing zero-initialization, so the memory will already be zeroed out on
construction. Because of that, there's no need to zero it out again.
Lioncash
zhupengfei
Weiyi Wang
Tobias
ReinUsesLisp
Adityarup Laha
James Rowe
Vamsi Krishna
xperia64
liushuyu
BreadFish64
Dimitri A
bunnei
tgsm
ReinUsesLisp
SachinVin
B3N30
Carl Kenner
Dimitri ALBORA
Frederic Laing
Otávio Pace
Ben
Valentin Vanelslande
RicBent